Stamping part processing mainly uses stamping equipment to make the plate into the desired shape under the action of pressure in the die.  It can be seen here that the die is also an important part of Stamping Parts processing. We should carefully maintain the die in order to make it play its own role.

Under normal circumstances, the maintenance of the mold is to wait for the mold to cool before cleaning the mold, spraying antirust agent, closing the mold, and then storing the plastic machine under the mold regulations.

When Plastic Injection Parts are used normally, it is better not to clean the mould beforehand, so as to avoid increasing the production cost due to a large number of mould cleaning agents. The wish of the end user is that the antirust oil on the mould can be taken away when making the first product only at a very low mould temperature, and the surface of the product punched after the precision parts are processed will not be stuck with the residual antirust agent on the mould, thus avoiding a lot of waste.

Transparent mold rust inhibitors are classified into waxy and oily rust inhibitors. Let's make a comparison first. The disadvantage of oily transparent mold rust inhibitors is that they are basically non-drying when sprayed, and a layer of oil will cause local rust marks in case of erasure. Some products still flow and have short rust prevention period.

The wax transparent mould rust inhibitor is sprayed with a layer of dense semi-dry protective soft film, which integrates the five functions of corrosion prevention, rust prevention, dehumidification, lubrication and strong permeability. The super permeability and adsorbability can form unique moisture and air replacement components on the mould surface and various metal surfaces, effectively prevent various unfavorable factors from corroding the metal surface, and realize long-term and comprehensive corrosion prevention and rust prevention of the mould.